High Gloss Rose Red Car Wrap Slidable Air Release Vinyl Wrap UV Resistant

 Product Name:  High Gloss Rose Red Car Wrap Film Air Release Slidable

 Product Description:

• Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments.
• Get an incredibly durable, high gloss finish that you can apply anywhere!
  Perfectly suited to a variety of automotive
  Easy-to-install, air-release, mess-free adhesive. Liftable, slideable and repositionable, sticks with pressure alone. Never worry about bubbles or creases.

Product Specfications:

Product Application:

￭ Emergency Vehicles

￭ Vehicle advertising

￭ Trucks

Product Features:

• Exceptional durability and performance
• Very high gloss semi-conformable film
• Unique patented adhesive technology
• Excellent conformability around curves and recesses
• UV, temperature, humidity, and salt-spray resistance
• Easy apply feature helps eliminate wrinkles and bubbles during application
• Combines a colored film and protective layer in one convenient construction with fewer seams

  FAQs:

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

• How to remove vinyl from your car?

1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

Advantages of Applying Car Wrap Film:

• Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
• Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• It’s difficult to tell it’s not painted.
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• Vinyl car wraps protect your OEM paint and are 100% removable.
• Many of the styles can not be reproduced by paint.
• You can restore the car to its original color by removing the wrap.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.