Place of Origin: | Guangdong, China |
Brand Name: | ShengHui |
Certification: | SGS |
Model Number: | SHCHCW-45 |
Minimum Order Quantity: | 1 Roll |
---|---|
Price: | USD 200/ Roll |
Packaging Details: | 1.52*18m |
Delivery Time: | 5-7 days |
Supply Ability: | 200,00 Rolls/Month |
Face Film:: | Polymeric Calendered Vinyl Film | Face Film Thickness:: | 4.8 MIL (120 µm) |
---|---|---|---|
Surface Finish:: | Chrome | Adhesive Type:: | Clear Removable Acrylic Adhesive |
Adhesive Thickness:: | 30 µm | Release Liner:: | PET Release Liner/Air-Egress PE-coated Paper Liner |
Thickness:: | 60 µm/140gsm | Max Durability:: | Up To 5 Years |
High Light: | Red Chrome Car Wrap Film,Scratch Resistant Chrome Car Wrap Film,Bubble Free Chrome Car Wrap Film |
Red Chrome Car Wrap Film Slideable Bubble Free Scratch Resistant
Product Name: Scratch Resistant Red Mirror Chrome Car Vinyl Wrap Bubble Free SGS
Product Description:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Chrome | Color: | Silver Mirror | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product Size. |
Advantages of Applying Car Wrap Film:
Product Application:
Product Features:
FAQs:
A. Will car wrap damage my car’s paint?
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
B. How long does vinyl wrap last?
Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.
C. How to remove vinyl from your car?
1.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
2. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
3.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
Contact Person: Drew zhu
Tel: +8613533241184