Place of Origin: | Guangdong, China |
Brand Name: | ShengHui |
Certification: | SGS |
Model Number: | SHGDCW-43 |
Minimum Order Quantity: | 1 Roll |
---|---|
Price: | USD 250/ Roll |
Packaging Details: | 1.52*18m |
Delivery Time: | 5-7 days |
Supply Ability: | 200,00 Rolls/Month |
Face Film:: | Polymeric Calendered Vinyl Film | Face Film Thickness:: | 4.8 MIL (120 µm) |
---|---|---|---|
Surface Finish:: | Glitter & Diamond | Adhesive Type:: | Clear Removable Acrylic Adhesive |
Adhesive Thickness:: | 30 µm | Release Liner:: | PET Release Liner/Air-Egress PE-coated Paper Liner |
Thickness:: | 60 µm/140gsm | Max Durability:: | Up To 5 Years |
High Light: | Colorful Laser White Glitter Car Wrap,Polymeric Calendered Vinyl Glitter Car Wrap,60µm Thickness Glitter Car Wrap |
Bubble Free Slideable Colorful Laser White Glitter Car Wrap Film
Product Name: Temperature Resistant Adhesive Vinyl Car Wrap Laser White Sparkle Car Wrap 140gsm
Product Description:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Glitter & Diamond | Color: | Silver | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product Size. |
Product Application:
■ Buses
■ Trailers
■ TruckS
■ Cars & Vans
■ Emergency Vehicles
Advantages of Applying Car Wrap Film:
Product Features:
FAQs:
Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
1. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface
2..Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
Contact Person: Drew zhu
Tel: +8613533241184