Place of Origin: | Guangdong, China |
Brand Name: | ShengHui |
Certification: | SGS |
Model Number: | SHGDCW-21 |
Minimum Order Quantity: | 1 Roll |
---|---|
Price: | USD 250/ Roll |
Packaging Details: | 1.52*18m |
Delivery Time: | 5-7 days |
Supply Ability: | 200,00 Rolls/Month |
Face Film:: | Polymeric Calendered Vinyl Film | Face Film Thickness:: | 4.8 MIL (120 µm) |
---|---|---|---|
Surface Finish:: | Glitter & Diamond | Adhesive Type:: | Clear Removable Acrylic Adhesive |
Adhesive Thickness:: | 30 µm | Release Liner:: | PET Release Liner/Air-Egress PE-coated Paper Liner |
Thickness:: | 60 µm/140gsm | Max Durability:: | Up To 5 Years |
High Light: | 1.27m Blue Glitter Vinyl Wrap,Slidable Blue Glitter Vinyl Wrap,1.27m high gloss car wrap |
Product Name: Air Release Slideable Laser Blue Glitter Car Wrap Film
Product Description:
Car wrap film is the medium of choice for vehicle advertising because it costs much less than a custom paint job, and it offers significantly more design and finish options than paint.
Product Features:
Product Specfications:
1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
Surface Finish: | Glitter & Diamond | Color: | Silver | |
2. Adhesive | Type: | Clear Removable Acrylic Adhesive | ||
Thickness: | 30 µm | Color: | Clear | |
3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
4. Max Durability | Up to 5 years | |||
5. Product Size | Width | Length | ||
(metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) | |
1.27 | 50 | 18 | 20 | |
1.52 | 60 | 23 | 25 | |
Notice: There is a Minimum Order Requirement for Special Product Size. |
Product Application:
■ Emergency Vehicles
■ Buses
■ Cars & Vans
Advantages of Applying Car Wrap Film:
FAQs:
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.
1. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface
2..Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
4. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
Contact Person: Drew zhu
Tel: +8613533241184